Installing Your Heater
Before using the heater, The unit must be either wall-mounted or fitted to
its’
stand. First, Unpack the appliance and remove all the packaging. Check that the
appliance shows no signs of damage.
WALL MOUNTING
Wall bracket and fixing pack. Consisting of:
1 x Wall mount plate
1 x Small angled plate
6 x Mounting screws and wall plugs
2 x Small black screws to secure the angled plate
The wall bracket must be fitted horizontally and the cable routed to the bottom right of
the heater. A distance of 600mm from bottom of heater to floor is recommended for
optimum viewing of fuel bed. Mark the top four screws fixing positions on wall in
accordance with the pre-drilled holes in the wall bracket.
Ensure that the bracket is level by using a spirit level whilst marking out the hole
positions. Drill holes with a correct size drill bit for the wall plugs.
Fix the wall bracket using 4 of the wall plugs and screws provided.
Attach the lower fixing bracket to the base of the heater using the two small black screws
supplied.
The appliance must not be located immediately below a socket outlet.
WALL MOUNTED HEATERS ARE ONLY TO BE MOUNTED ON HEAT RESISTANT
WALLS THAT COMPLY WITH CURRENT AS/NZS SPECIFICATIONS & BUILDING
REGULATIONS