Goldair GCV100, Operating Instructions Manual

Page: 7 / 12

Operating your Convector Heater
HEAT CONTROL SWITCH
The control switch positions are:
O Off
I Low Heat
II Medium Heat
III High Heat
Check that the heat control switch is set to Off position
before plugging the heater into the mains supply. For
greater economy, use the High Heat setting initially and
then switch to the Low Heat setting.
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you reach the
maximum position.
2. When the room reaches a temperature that is
comfortable for you, slowly turn the knob anti-
clockwise until the heater just turns off (you will hear
a click).
3. The heater will now cycle on and off to maintain the
comfort level you have set.
4. Take note of this setting position for future use.
FAN BOOST
Additional to the three heat settings there is a fan with a
separate On/Off switch located on the front of the heater
by the fan outlet. The fan function is for distributing heat
into the room at a faster rate.