Assembling your Convector Heater
WARNING:
Heater must not be used without the feet fitted.
This appliance has been supplied with ‘1 way screws’ for permanent installation of the
feet. This is a safety requirement for the New Zealand and Australian market.
ASSEMBLY OF HEATER
Carefully turn the main body upside-down on a scratch-free and stable surface. Be
careful to prevent damage to the cosmetic finish or your floor surfacing.
Attach the feet to the base of the heater by aligning the built-in position pins with the
position holes on the base of the heater and fixing a screw into the hole between the
two position holes. Use one screw for each foot.
Summary of Contents for GCV100
Page 1: ...Operating Instructions 2000W Convector Heater Model GCV100...
Page 11: ......
