Operating your Fan
Fan control switch
The control switch positions are:
• 0 = OFF
• 1 = Low Speed
Check that the Fan control switch is set to the
off position before plugging into the mains
supply.
Place the Fan on a dry, level and sturdy
surface.
Plug the power cord into the socket, making
sure the speed control is at OFF position.
To operate the fan push down speed control
desired.
To activate the oscillation function, push
down the oscillation button on the control
panel. The fan will then oscillate until the
button is pushed again to turn off.
Timer
The timer function allows the unit to be
set to operate for a length of time from 20
minutes to 2hours.
Turn the timer dial to the amount of time you
would like to run the fan before it switches off.
If you want to use the fan without setting the
timer, adjust the timer to the
“0 (off)” position.
•
2 = Medium Speed
•
3 = High Speed
