Components
Assembling your Fan
1.
Switch Panel
2.
Blade
3.
Rear Case
4.
Front Case
5.
Base
For ease of assembly, lay the Fan down so
that the front grill and control panel are facing
up. Assemble the Base by interlocking the
guides on Support Base A with Support Base
B. Thread the Power Supply Cord through
the large hole in the centre of the Support
Base Assembly. (Figure1)
Secure screws into the four holes in the
bottom of the base. (Figure 2)
Align the Support Base Assembly with the
Column Support Assembly.
NOTE: The cord channel on the bottom of
the support base should be towards the back
of the Fan.
Assemble the Support Base Assembly to the
Column Support Assembly with 3 Screws.
Gently pull any excess slack of the Power
Supply Cord and place it in the Wire Locating
Trough. (Figure 3)
Figure 3
