![background image](http://html1.mh-extra.com/html/goldair/gct320/gct320_operating-instructions-manual_2240167007.webp)
Operating your Appliance
HEATER CONTROL PANEL
ON/OFF BUTTON
This button will turn the heater control panel on..
To turn the unit off, press the On/Off button on the control panel again. Please note: the fan will continue
to run for 60 seconds to cool the elements. This is normal.
Then turn the Power Switch at the back of the heater to
“O”
position.
MODE BUTTON
Press the MODE button to set between High, Low & Eco modes.
ECO Mode: The heater will run and adjust the power between 750W and 1500W automatically for keeping
the ambient temperature around 20 degrees Celsius.
When the heater is in HIGH or LOW modes you can adjust the thermostat by pressing either the
“UP”
or
“DOWN”
arrow buttons to set your desired comfort level.
To find your preferred heat setting, set the thermostat to the maximum setting. When the room reaches a
comfortable temperature for you, reduce the temperature until you hear a click from the thermostat then
leave the thermostat at this setting. The heater will now cycle on and off to maintain the set temperature.
NOTE: the temperature is read from a thermostat in the heater, for a more accurate reading, position a
separate thermometer in another part of the room.
For greater economy, use the High Heat setting initially and then switch to the Low Heat setting.
For the Low and High Heat settings the fan remains at the same speed; only the element changes to create
the greater/lesser heat output.
OSCILLATION BUTTON
This button turns the heater oscillation function on and off.
TIMER
AUTO OFF TIMER
When the heater is turned on press the TIMER button to set the desired number of hours (1-12) until the
heater turns off.
To cancel the timer, press the button until it shows zero.
AUTO ON TIMER
When the heater is turned OFF press the TIMER button to set the desired number of hours (1-12) until the
heater turns on.
To cancel the timer, press the button until it shows zero.