![background image](http://html1.mh-extra.com/html/goldair/gcpf315/gcpf315_operating-instructions-manual_2240044004.webp)
Components
Description
1. Centre Cap
2. Front Guard
3. Circular ring
4. Blade Lock Nut
5. Blade
6. Rear Guard Retaining Nut
7. Rear Guard
8. Motor Body
9. Column
10. Base
11. Base Weight
12. Column Washer
13. Column Connecting Bolt
14. Remote control
COLUMN ASSEMBLY INSTRUCTIONS
1.
Take the base and column parts from the
packing box and loosen the plastic nut.
2.
ix the column on the base plate using the
plastic nut.
3.
Unscrew the height adjusting knob.
4.
Move the extension pole to the desired
height.
5.
Then screw the height adjusting knob to
tighten the extension pole.
FAN BODY ASSEMBLY INSTRUCTIONS
1.
Unscrew the spinner clockwise and the nut
counter-clockwise to remove both of them.
2.
Set the rear guard in the proper position with
handle up.
3.
Screw on plastic nut tightly to attach rear
guard.
4.
Discard plastic sleeve on motor shaft.
5.
Install the blade onto the motor shaft until it
reaches the retaining pin.
6.
Screw spinner onto motor shaft counter
clockwise to blade.
7.
Press the rim of the rear guard onto the front
guard until the rear guard is properly fitted.
8.
Secure both guards firmly by tightening the
fan guard then close easy clip.