Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable appliance.
Operating your Fan
WARNING:
Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Place the fan on a dry, level and sturdy surface.
Check that the fan control is set to the off position before plugging into the mains
supply.
Fan control
Switch on the appliance by pressing the on/speed button on the
control panel. The fan starts to blow at low speed.
The low speed indicator will illuminate.
To change speed, press button. Fan speed will change with
each button press. The corresponding indicator light will illuminate.
Switch fan off by pressing off button.
To tilt, loosen the neck screw
–
adjust to position
–
then tighten the neck screw to
hold.
Oscillation
To activate the oscillation function, press the swing button. The swing indicator will illuminate
and the fan will begin to oscillate. To stop oscillation, press button a second time.
Timer
If you wish to turn the fan off at a pre-determined time press the timer button. The fan can be
set to turn off from 0.5 hours to 7.5 hours.
To set the timer, turn the fan on at the desired speed, press the timer button until the desired
run time is illuminated. The fan will turn off once the time has expired. If no time is selected, the
appliance will operate continuously.
