Operating your Bathroom Scale
Place scale on a hard, flat surface for an
accurate and reliable result. Do not use on
carpet or rugs. Uneven surfaces may
affect readings.
FIRST TIME USE:
Remove insulation tape from battery
compartment.
TO WEIGH:
Step onto scale evenly and stand still. The
scale will automatically display weight in
KG, LB or ST. There is no need to
“foot-
tap” the scale to turn it on.
AUTOMATIC SWITCH OFF:
The scale will switch off automatically after
6 seconds of idle time.
UNIT OF MEASURE SWITCH:
The scale is set to KG by default. To
switch to LB/ST, press the switch on the
back of the scale.
OVERLOAD INDICATOR:
If the scale is overloaded, the
“Err”
message will be displayed.
LOW BATTERY INDICATOR:
If the “Lo” message displays, the battery is
low. Replace the battery
– 1 x 3V CR2032
Lithium battery is required.
SUPPORT AND TECHNICAL ADVICE
PO Box100707, NSMC, Auckland
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
