Assembly Procedure
Page 18
Important: The hose must not be kinked.
Step 13.
A Goldair Universal Rotisserie is not supplied with this BBQ but can be purchased separately from your local
BBQ Retailer. To Install the Goldair Universal Rotisserie install the 2x support brackets with adjustable slides
on either side of burner box to gain the height for the Rotisserie
Step 14.
The BBQ is intended to be used with a standard 9kg LPG cylinder. This is the type of cylinder that
can be refilled at petrol station or swapped for similar cylinder.
Place the cylinder in position under the left hand side burner, so that cylinder sits flush on the
ground.
Take the hose that came with the BBQ, check that it has a rubber seal on the regulator end of the
hose and connect this end to the gas cylinder, ensuring that the hose is not twisted. You
won’t need
a spanner here. Just turn the fitting in an anti clockwise direction and hand tighten as much as you
can. This should seal it sufficiently.
It is important to conduct a leak test prior to use. Follow leak test procedure.
(
Procedure
located on Page 2 of this manual)
