HEAT CONTROL
Ensure the heater has power available by turning
it on at the isolating switch. Pull the pull-cord to
start the heater. The neon indicator light will
illuminate indicating the heater is in operation.
Pull the pull-cord again to turn the heater off.
AUTOMATIC STEP-DOWN HEAT
When the room reaches a pre-set temperature,
the heater will automatically step-down and
reduce the heat output to save power. If the
room cools down, the heater will automatically
step-up and increase the heat output.
OVERHEAT PROTECTION
The heater will turn itself off in the event of over
heating. The most common cause of over
heating is deposits of dust or fluff entering the
appliance. Ensure these deposits are removed
regularly by vacuum cleaning the inlet and outlet
grills. The heater will automatically re-set when it
has cooled down.
CAUTION
The Fan Heater generates heat during use.
Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to
persons.
Do not use this heater with a programmer, timer,
separate remote-control system or any other
device that switches the heater on automatically,
since a fire risk exists if the heater is covered or
positioned incorrectly.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. (Refer to back of booklet).
CLEANING
The heater requires regular cleaning to ensure
trouble free operation:
1.
Turn the isolating switch off. For added
protection, also turn the mains supply off.
2.
Use a vacuum cleaner to remove dust and
fluff from the inlet and outlet grills.
3.
Use a damp cloth to clean the exterior of
the heater. Do not use abrasive cleaning
products on this appliance
4.
Ensure the heater is dry before turning the
power supply back on to the heater.
SERVICE INSTRUCTIONS
Do not attempt to repair or adjust any electrical
or mechanical functions on this unit. Doing so
will void the warranty. Contact a qualified
electrical person to service the heater.
IMPORTANT! NEVER COVER THIS HEATER!
Covering the heater will cause activation of the
non resettable safety fuse.
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland, New Zealand
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.Goldair.co.nz
Operating your Bathroom Fan Heater
