Operating your Stick Blender
1.
Make sure that the food you are
blending
is
of
sufficiently
low
temperature to avoid burning/scalding
in case of skin contact, and to avoid
your hand blender overheating.
2.
Fit the power handle inside the blender
shaft, turn and lock.
3.
Plug in and switch on power at mains
socket.
4.
To avoid splashing, place the blades
into the food before switching on.
5.
Press the fast speed or low speed
button until finished blending.
6.
Don’t let the liquid get above the join
between the power handle and blender
shaft.
7.
Move the blade through the food and
use a stabbing action.
8.
Wait until the blade has come to a
complete stop before removing the
appliance from the food.
9.
If your blender gets blocked, unplug
before cleaning.
10. After use, unplug, dismantle and clean
according to directions.
CAUTION:
Do not leave the appliance running non-
stop for more than 1 minute at a time.
NEVER immerse the motor housing in
water.
Be sure the unit is turned off and cord is
unplugged from electrical outlet before
removing the attachments from housing.
Always
add
liquid
when
blending
vegetables or fruit.
Do not use for blending very hard and/or
or dry foods or crushing ice
NOTE:
SHAFT CONNECTION TO HANDLE MAY BE
TIGHT WHEN STICK BLENDER IS NEW. APPLY
A SMALL AMOUNT OF VEGETABLE OIL TO
BOTH PARTS AND LOCK/UNLOCK SEVERAL
TIMES TO LOOSEN A LITTLE. NOTE THAT THE
FIT DOES NEED TO BE QUITE FIRM TO
ENSURE THE SHAFT AND HANDLE ARE
SECURELY CONNECTED DURING USE.
TECHNICAL SPECIFICATION
Model No:
FSB260BK, FSB260W
Power Supply:
220 - 240VAC 50Hz
Wattage:
500W
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
