Assembly
Audio Input Cable: (Fig.2)
Select the audio cable supplied in the kit.
Carefully insert the female 2 pin plug into the male
2 pin input plug (1) fitted to the bottom panel.
Screw the lock nut securely.
Haptic transducer: (Fig.1)
Select the audio/haptic Transducer.
Insert carefully the female 3 pin plug into the male
plug (2) fitted to the bottom of the panel.
Screw the lock nut securely.
Audio Amplifier Output: (Fig.1)
The QUAVAR
-
PI provide audio amplification for the use
of an external speaker. The speaker can be used a
teaching aid, and for operator with partial loss of hear-
ing preferring to have sound.
The 6.5mm audio output jack (3) fitted to the top
panel, is to be used with mini external speaker sup-
plied in the kit. The external speaker and haptic
transducer can be used at the same time.
ON/OFF Volume Switch: (Fig.1)
The switch (4) activates the haptic transducer and
audio amp, as well as controlling the amplifiers vol-
ume. The haptic system dose not require sound to
operate . The volume can turned down.
4
The target has been dug up
1
6
5
3
4
2
Fig. 1
Fig. 2
