4
CONTENT AND KEY FEATURES
WHAT YOU WILL FIND IN THE PACKAGE
•1 TURNTABLE plinth
•1 DUST COVER [detachable]
•1 TURNTABLE SPEED CONTROL UNIT
•1 POWER ADAPTER
•1 B-5 TONEARM[with the cable already installed]
•1 COUNTERWEIGHT
•1 PLATTER SPINDLE TIP
•1 DRIVE BELT
•1 INSTRUCTION MANUAL
•1 ALLEN KEY 2,5mm
to block the ARM LIFT BOARD
•1 ALLEN KEY 2,0mm
to remove the DIN PILLAR
•1 ALLEN KEY1,5mm
to adjust the VTA of the tonearm
to remove the LIFT CUEING
to adjust the ANTI SKATE CYLINDER
•1 ALLEN KEY 0,9mm
to adjust the TONEARM SHELL AZIMUTH
•1 PROTRACTOR/OVERHANG for cartridge alignment
with STROBOSCOPE for fine speed adjustments
•1 GN STYLUS GAUGE
CONSTRUCTION FEATURES
This section describes the special features of your Valore 425
Plus, the construction details, the reasons for the technical
choices and the originality of the design. The Valore 425 Plus
is a rigid turntable that uses a plinth made of high damped
lacquered MDF.
• The turntable platter is 23mm thick and made of acrylic,
chosen for its dampening quality and stability.
• The spindle is in high quality machined stainless steel and
clamp the platter through its conical shape and is 60mm long
to ensure top performance.
A large longitudinal groove is located on its axis to allow the
lubricating oil to run constantly. The longer spindle eradicates
any pendulum effect and distributes the inertial energy along
its entire axis, completely annulling any type of lateral friction.
• The platter bearing is threaded outside in order to be tightly
blocked to the plinth of the turntable on its own axis allowing
a precise coupling.
• The custom AC 12 Volt electronically controlled motorallows
33
⅓
rpm
& 45
rpm
electronic speed control and pitch
adjustment. The motor features the Gold Note PWM
technology and allows a 12V very low voltage functioning
powered by a triple conversion of the voltage, from AC230V to
DC230V and then to DC12V to be finally reconverted into
AC12V. The final result is a total control over the power supply
in order to give the motor its perfect phasing, with a
convenient speed 33/45
rpm
adjustable set up and fine pitch
control.
