17
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Levelling the turntable.
Cleaning the turntable.
Motor heating.
Motor noise.
The turntable is not levelled.
The turntable is dirty and requires
cleaning
The motor is too hot.
The motor produces a low scraping
noise while in function.
The motor produces a buzzing noise
while in function.
With a spirit level, only level the Turntable Platter
through its shelf layer eventually screwing its feet just
for very fine adjustment, take care of levelling the
platter on its vertical and horizontal lines
Be sure that the turntable layer is enough solid and
rigid to support the weight of the turntable easily
With EXTREME care use ONLY very soft 100% cotton
cloth to sweep dust and stains out.
Any acid or not extremely soft cloth will irreversibly
damage the turntable fine aesthetic.
Do not use any alcohol to clean the turntable anodised
label, pulley and motor spindle.
Only dry cloth is allowed
AC synchronous motors as the ones used by Gold
Note may warm up to 50° Celsius without creating
any problem.
Gently lift the pulley enough as required to avoid
the noise.
Adjust the 3 stainless steel screws on the motor's
cover: unscrew them slightly until the motor spins
smoothly and without noise.
TROUBLESHOOTING
