The Breeze
Model No. 3030-00-000
Page 10
gmpopcorn.com
Machine Operation
Floss Machine Operation (3030 Breeze)
WARNING
Floss head rotates at high speeds. Operator MUST keep hands and face
clear of the floss head to avoid injury. Operator must wear eye protection.
Keep all spectators at a reasonable distance, and use a Floss Bubble for
added customer protection.
015_062714
1.
Follow the guidelines described in the Electrical Requirements Section for supplying
power to machine.
2.
The Heat Switch and the Motor & Master Switch should be in the OFF position.
3.
With the spinner head stopped, pour flossugar into the spinner head. Always fill it
90% full with sugar. This 90% level is necessary to obtain a balanced condition in the
floss head.
DO
NOT
OVERFILL!
IMPORTANT:
NEVER
add
sugar
when
motor
is
running.
4.
Turn the Motor & Master Switch ON. Wait 10 seconds, then turn Heat Switch ON.
5.
Turn the Heat Control Knob clockwise to maximum setting to initiate the fastest
possible warm-up.
6.
The machine should start making floss in about 30 seconds. When unit starts making
floss,
reduce
the
heat
setting
. Turn the Heat Control counter-clockwise to eliminate
smoking. If the unit is operated at the “startup” setting it will carbonize the element.
CAUTION
Never operate the equipment for a prolonged period of time with the HEAT
CONTROL in a position that causes the sugar to smoke. This will result in
excessive carbonization of the heat element. If you smell burning sugar or
see smoke, reduce the heat.
030_070914
7.
Once the ideal Heat Control setting is found, operate with the setting near this position
each time.
8.
When the floss head needs to be refilled with sugar, or to stop the machine, turn the
Heat Switch OFF and allow the motor to run for at least 1 minute to “cool down” the
floss head, then turn the Motor & Master Switch OFF.
IMPORTANT:
Failure to cool down the floss head could result in leaving melted sugar
in the floss head. If the motor is restarted, this melted sugar will exit the floss
head and could cause burns.
In addition, sugar left in the floss head may smoke or cause carbon build up.
When completing operation for the day (or any prolonged period), follow the instructions
in the Shutdown Procedure/Cleaning and Care section of this manual.
