Grand and Twin Grand
2848, 2860, and 2873 (32 oz. Pop-O-Golds)
Pop-O-Gold & Medallion (-100 Series)
2948, 2960, and 2973 (52 oz. Medallions)
Page 17
gmpopcorn.com
8.
Dump solution into a bucket, do not spill any in the interior of machine.
9.
Rinse kettle interior with clean water and cloth.
10.
Dump any water remaining into a bucket (do not spill any in the interior of machine),
then wipe the kettle interior clean with a dry cloth.
For an extra dirty kettle, the process may be repeated; or, after turning kettle heat OFF,
allow solution to sit in kettle overnight. The next morning, finish the cleaning steps.
11.
A Clean-In-Place Hook is located behind the kettle support arm (on operator side).
This feature safely holds the kettle in place for cleaning purposes, and allows access to
hard to reach places without removing the kettle. To remove the lid and agitator
assembly, tilt kettle into the dump position, and swing the hook into position (see
image below).
12.
With unit OFF and unplugged, use a clean SLIGHTLY damp cloth (wring ANY EXCESS
water from cloth before use) and wipe the kettle lead cord clean.
DO NOT get moisture
into the kettle lead-in cord, severe damage will result.
13.
After kettle cleaning, check to be sure the crossbar fasteners are securely tightened.
Daily Unit Cleaning Instructions
1.
Turn machine OFF, unplug unit and allow it to cool before attempting to clean.
2.
Remove any remaining popcorn.
3.
Remove all pans/accessories and take them to the sink to clean with soap and water,
then rinse and dry.
4.
Clean under corn pan to remove all popcorn bits and seeds with a vacuum as needed,
then wipe the area with a clean dry cloth to remove any grease.
5.
Wipe clean the area above the corn pan and exterior surfaces using a SLIGHTLY damp
cloth to remove any grease from the glass and cabinet (cloth may be SLIGHTLY
dampened with soap and water, then wipe again with clean water to remove any
remaining cleaner).
Clean-In-Place Hook
