Gold Medal Citation 2001 Instruction Manual Download

Page: 3 / 29

Citation 16 oz. Popper

Model No. 2001, 2001ST

Page 3

gmpopcorn.com

WARNING

DO NOT allow direct contact of this equipment by the public when used in

food service locations. Only personnel trained and experienced in the

equipment operation may operate this equipment.

Carefully read all instructions before operation.

012_010914

WARNING

This machine is NOT to be operated by minors.

007_010914

Note:

Improvements are always being made to Gold Medal’s equipment. This information

may not be the latest available for your purposes. It is critical that you call Gold Medal’s

Technical Service Department at 1-800-543-0862 for any questions about your

machine operations, replacement parts, or any service questions. (Gold Medal

Products Co. does not assume any liability for injury due to careless handling and/or

reckless operation of this equipment.) General images may be used in manual for

reference only.

Summary of Contents for Citation 2001






























Search results

Summary of Contents for Citation 2001

Reviews:

Related manuals for Citation 2001

Brands by name

Popular brands

Gold Medal Citation 2001, Instruction Manual

Search results

Summary of Contents for Citation 2001

Reviews:

Related manuals for Citation 2001

Brands by name

Popular brands