Citation 16 oz. Popper
Model No. 2001, 2001ST
Page 14
gmpopcorn.com
ORDERING SPARE PARTS
1.
Identify the needed part by checking it against the photos, illustrations, and/or
parts list. (General images may be used in manual for reference only.)
2.
Use only approved replacement parts when servicing this unit.
3.
When ordering, please include part number, part name, and quantity needed.
4.
Please include your model number, serial number, and date of manufacture (located
on the machine nameplate/data plate) with your order.
5.
Address all parts orders to Parts Department, Gold Medal Products Co., 10700
Medallion Drive, Cincinnati, Ohio 45241-4807
or place orders by phone or online:
Phone: (800) 543-0862
(513) 769-7676
Fax: (800) 542-1496
(513) 769-8500
E-mail: [email protected]
Web Page: gmpopcorn.com
Replacing Broken Glass
Broken glass panels can be easily replaced. Gold Medal
Products Co. does not ship glass. It can be
obtained from a local glass shop, always purchase tempered glass.
GLASS DIMENSIONS
(Height x Width x Thickness)
Front Glass:
28 3/16” x 22 15/16” x 1/8” (1 Piece)
Side Glass:
28 3/16” x 15 1/2” x 1/8” (2 Pieces)
1.
Turn machine OFF, unplug unit and allow it to cool before attempting to replace glass.
2.
Carefully remove all loose pieces of broken glass.
3.
Lift out the corn pan (bottom pan).
4.
Locate the Glass Retainer Strips on each corner post holding in the glass panel, and
remove the screws to unfasten the retainers.
5.
Carefully remove the rest of the broken glass.
6.
Remove all rigid glass channels from around the glass to be replaced, set channels
aside for reuse.
7.
Apply decals (if desired) to new glass panel.
8.
Slide rigid glass channels over the exposed sides and bottom of new glass panel.
9.
Fasten new glass panel in machine with existing glass strips and screws.
10.
Reinstall corn pan (bottom pan).
