6 oz. Pop About Popper
Model No. 2660SR
Page 7
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and their Functions
LIGHT AND WARMER SWITCH -
Turns on the heat to the bottom corn pan and heat light.
KETTLE MOTOR SWITCH -
Turns on the motor which drives the kettle agitator.
KETTLE HEAT SWITCH -
Supplies power to the thermostat controlled kettle.
Amount of Popcorn and Oil
Your new Popper is equipped with a corn measuring cup. Popcorn popped in coconut oil stays
fresher longer. Coconut oil does not leave black deposits in your kettle like other oils.
Corn charge
– 6oz.
Oil charge
– 2oz.
Flavacol
– 1 Tablespoon
For best results use 8oz. mega-pop premeasured pouches (Item# 2838)
Popping Instructions
1.
Turn both the kettle heat and kettle motor switches “ON.”.
2.
Test pop three kernels of corn and one ounce of popping oil. When the kernels pop,
the kettle is ready for use.
3.
Load both a full corn/oil charge and Flavacol seasoning salt into the kettle. Close the lids.
4.
When the corn has finished popping, gently dump the kettle.
5.
Repeat the cycle, starting with step number 3, until the desired amount of popcorn has
been achieved. Always pop 3 to 5 consecutive batches for the best popcorn.
6.
On the final kettle of corn, it is a good idea to turn the kettle heat switch “Off” just as
the lids are forced open by the popping corn. This procedure saves electricity since the
kettle has plenty of heat and eliminates smoke/odor from any oil residue that remains
after you have stopped popping.
NEVER LEAVE THE HEAT ON WHEN YOU ARE NOT POPPING!
Light and
Warmer Switch
Kettle Motor
Switch
Kettle Heat
Switch
