2410E and 2411E
MODEL # 2410E AND 2411E
9
3. Release the draw latch to easily remove the mixing drum, then remove paddles. The mixing
drum and paddles can be taken to the sink to clean.
4. Wipe the kettle lead cord with a clean
SLIGHTLY
damp cloth.
DO NOT get moisture into the
kettle lead-in cord, severe damage will result.
5. The cabinet of your machine should be wiped clean daily (or more, depending on usage) with a
clean soft cloth, SLIGHTLY dampened with soap and hot water.
Wipe the stainless steel parts with a clean cloth and cleaner designed for stainless steel, such as
Gold Medal Watchdog Stainless Cleaner (Item No. 2088).
DO NOT
use oven cleaners or abrasive materials as they will damage parts of the machine.
Proper Hub Seal Assembly Cleaning Procedure
1. Unscrew the wing bolt (Mixing Paddle Lock Stud Assy.) and remove the mix paddles.
2. Remove any burrs on the shaft using a fine grit emery paper to lightly sand the surface. If the burrs are
not removed, damage may occur to the o-ring/oil seal during removal/installation.
3. Remove the hub seal assembly and soak it in hot water to clean.
4. Clean the area around the center hub. Remove any product residue. (Units manufactured prior to Jan.
2014, see Kettle Shaft Maintenance section for note on lubricating kettle bushings.)
5. Lightly lubricate the center hub of the kettle with a small amount of vegetable oil to allow for easy
installation of the hub seal assembly.
6. Slide the clean hub seal assembly down the agitator shaft. Apply pressure to ease the assembly over
the center hub of the kettle until it seats properly (see diagram below.)
7. Slide the hub seal assembly down the agitator shaft. Apply pressure to ease the assembly over the
center hub of the kettle until it seats properly. (See diagram below.)
8. After the hub seal assembly has been properly installed, re-install the mix paddles onto the agitator
shaft.
9. Replace the wing bolts and finger tighten.
Agitator Shaft
Mixing Paddle
Wing Bolt
(Mixing Paddle
Lock Stud Assy.)
Hub Seal
Assembly
O-Ring
