Karmel Kool Table
Model No. 2169-00-100
Page 12
gmpopcorn.com
Control Pendant Orientation
Depending on the placement of the table, the Control may need to be located on the opposite side
of the unit. Follow the instructions below to re-route the cord out the opposite side of the unit
(reference the images shown).
1.
Raise the table to the highest position, then turn unit OFF and unplug it before
switching the control to the opposite side of the table.
2.
Remove the (16) 10-24 lock nuts fastening the safety bellows to the base frame.
3.
Lift the bellows (bellows may be held up with zip ties for easy access to unit interior).
4.
Remove the 2 screws and 2 nuts holding the control cord plate to the frame. Pull the
cord and control pendant through the frame opening, then re-route it through the
opening on the opposite side, and reinstall fasteners to secure cord plate to frame.
5.
Lower the bellows and reinstall all fasteners to secure it to the frame.
Route Control through
opening in frame on
opposite side, then
refasten cord plate.
2
Remove the 1/4 -20 fasteners
holding cord plate.
1
Power Cord
to Control
General images shown for reference only.
2169 -00 -10 0
