11
metal of some kind in the floor, which might interfere with the objects
you’re testing or mask the signal completely.
5. Slowly sweep a sample of the material you want the detector to find
(such as a gold ring or a coin) 2-3 inches or more above the face of
the searchcoil. When the detector detects any metal, it sounds a
tone and an arrow appears below the target icon. Also LCD displays
the depth of the target.
Note:
If you are using a coin, the detector will detect it more easily if you hold
it so a flat side is parallel with the flat side of the searchcoil. A sweep
with the side of coin over search coil might cause false indication and
unstable display of arrow.
Outdoor Testing and Use
1. Slide POWER to ON. Set the operating mode.
2. Find an area on the ground outside where there is no metal.
3. Place a sample of the material you want the detector to find (such
as a gold ring or a coin) on the ground.
Note:
If you are using valuable metal such as gold to test the detector, mark
the area where you place the item, to help you find it later. Do not place
it in tall grass or weeds).
4. Hold the seachcoil level to the ground about 1~2 inches above the
surface, slowly move the search coil over the area where you
placed the sample, sweeping the search coil in a side-to-side
