10
not function except SENS. To adjust the sensitivity, first press SENS
and UP to increase the sensitivity, then press Dn to decrease it.
b. DISC—used for target discrimination. You can set the target range
from MAX to MIN by pressing DISC/NOTCH and UP & Dn keys. The
detector can detect the metal type indicated on the display.
Meanwhile the detector rejects other metal types without displaying
on
the screen. For example, press Dn key, 4 levels on segment from
Max
to Min is increased. At this time, the detector can detect S- CAPS, 1¢
and also 25¢, other types of metal are rejected.
c. NOTCH—to ignore the metal type you do not want. You can select
the metal type desired by pressing the UP and Dn keys. The LCD
segment will indicate the selected types of metal. The detector can
detect the selected metal type.
TESTING AND USING THE DETECTOR
To learn how the detector reacts to different metals, you should test it
before you use it the first time. You can test the detector indoors and
outdoors.
Indoor Testing and Use
1. Slide POWER to ON
2. Set the operating mode.
3. Place the detector on a wooden or plastic table, then remove any
watches, rings, or metal jewelry you are wearing.
4. Adjust the searchcoil so the flat part points towards the ceiling.
Note:
Never test the detector on a floor inside a building. Most buildings have
