KZ25 Pump Head User’s Guide
4
6
Setup and Operation
6.1
Tube Loading
1) Be sure the pump drive is turned off.
2) Rotate the lever all the way to the left to release the compression
block, and then remove it.
TUBING
GUIDE BLOCK
COMPRESSION
BLOCK
GUIDE SLOT
Figure 3. Remove Compression Block
and
Load Tubing
3) Load the tubing on the rollers and the two V-shaped slots of the
tubing retainers. Then put the compression block back.
4) Press the compression block and rotate the lever all the way to
the right to lock it.
5) Adjust the fastening screws to push the retainer to the right
position as shown below to fix the tubing.
