BT-F NEW Intelligent Dispensing Peristaltic Pump
32
Clockwise or counterclockwise.
The preview interface shows the current pump head tube size, the
amount of fluid that has been run, the volume, time and the number of
times it has been run
Click
Mode setting icon, the total steps and the total number of
cycles can be set in the interface
8.5
External Control Mode
The external input mode analog control the speed, the external signal
controls the start/stop and the direction. The front panel button doesn't work.
1) Switch the power off. Wire the DB15 connector as shown below, and
connect it to the DB15 port on the rear of the pump.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
ADC_W
AGND
0-5V/0-10V
/4-20mA
DC12V
VCC_W
COM
RS_W
CW_W
Figure 52 DB15 Wiring with External 12V DC Power Source
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
ADC_W
AGND
0-5V/0-10V
/4-20mA
RS_W
CW_W
Figure 50 DB15 Wiring with Internal 12V DC Power Source
2) Turn on the power switch. Pump will display the main screen.