SmartBox
®
4 / SmartBox
®
4
PRO
part no. 28 400 57 c
21 / 32
PROGRAMMING THE REMOTE MONITORING FUNCTIONS
If the device is linked to
www.smart-inspector.com
, this is done via the Internet.
As an alternative, the setting parameters for remote monitoring functions of the SmartBox
®
can also be transmitted via SMS by any mobile phone. This can be done directly on site or
optionally at a later time, e.g. from the company headquarters.
Command to the device (from a mobile phone)
•
An SMS may contain one or several commands.
•
However, the total length of the SMS must not exceed 80 characters.
•
There must be no spaces between the SMS commands and no special characters!
•
When entering a chain of commands, the commands
#R
or
#M
or
#C
must come at the end,
if applicable.
Setting the SMS target number (number of the receiving building supervisor):
•
Enter the SMS text ... #T=01701234567#M (i.e. the number of the reporting mobile phone)
•
... and send it the mobile network number of the SmartBox
®
.
•
Because of #M, the SmartBox
®
will send an SMS in reply (possibly after 1 - 2 minutes’ wait).
•
The SmartBox
®
indicates reception of this SMS by showing “Receive” in the display.
•
The transmission of the reporting SMS is indicated by showing “Sending” in the display.
Setting of unit names for the text messages of the system
•
Enter the SMS text #H=Tankmonitoring Jones NameofPlace #R
•
... and send it the mobile network number of the SmartBox
®
.
•
Commands as #T=... #H=... and #R can be sent as a chain in one single SMS.
Example:
Complete setup by means of one single SMS containing a chain of commands
#T=01714901312#H=Ct-024Tankmonit.K.Miller,LevenhamRd.21#P=10,07,15,01#R
See page 18 for a list of all commands.
Messages from the SmartBox
®
General, there are two ways to receive fill level measurements or other data from the
SmartBox
®
:
1. Manual
inquiry
Data from the SmartBox
®
can be queried through any mobile phone.
To do so, simply send an SMS with a brief command, e.g. #R, to the
mobile phone number of the SmartBox
®
. After approx. 2 - 3 minutes,
your mobile phone will receive the answer SMS with the data on tank
content(s). In addition to fill level measurements, configuration data of
the SmartBox
®
can be queried as well.
2. Automatic
messages
The SmartBox
®
can send various messages automatically to the
www.smart-inspector.com
system, to a (monitoring) mobile phone, or
to an E-mail address. The following messages are available.
