Leak detector type LAG 2000 A
part no. 15 071 53 e
21 / 28
Figure 8: Connection relay output for additional alarm – 2nd Display unit as external
alarm
•
Another display unit a can be connected to terminal
B
Alarm of display
unit as an external alarm for remote signal transmission.
•
Another external alarm can be connected to the display device a.
Mounting and electrical connection of the display unit a as described
above for display unit, not attach the front.
Connect the 2nd display unit a:
See
Figure 8
to connect the cable
of the display unit : Terminal "
C
"
Insert sensor cable through nipple
“
A6
” on the display unit a.
Attach the cable to 4 and 5
according to the terminal block
designation.
The polarity is unimportant.
If no other additional alarm is to be
connected to the relay output,
replace the front with 4 screws.
Fix the cable to the wall.
display unit
display unit a
START-UP
Check that the following connections are correct according to ASSEMBLY:
•
tank – LDL tank
•
tank – check valve
•
sensor unit – display unit
•
AC power supply – display unit
•
external alarm – display unit
Safety information on leak detector liquid
Before filling with leak detector liquid, read the safety data sheet (SDS) under all
circumstances.
When filling with leak detector liquid, wear safety goggles and gloves under all
circumstances.
If skin or clothing should make contact with the leak detector liquid or a mixture of
the leak detector liquid and water, wash with soap and water without undue delay.
If leak detector liquid should get into the eyes, rinse the eyes with lots of clean
water immediately. Consult a doctor as quickly as possible.
If the leak detector liquid is accidentally swallowed, DO NOT induce vomiting.
Consult a doctor as quickly as possible.
Clear up spilt leak detector liquid and/or mixtures consisting of leak detector liquid
and water as follows: Absorb with a suitable product, and
dispose of through a waste disposal company, stating the components.
