Caramatic DriveOne
Artikel-Nr. 71 813 50
13 / 36
INAPPROPRIATE USE
All uses exceeding the concept of intended use:
•
e.g. operation using different media, pressures
•
use of gases in the liquid phase
•
installation against the flow direction
•
changes to the product or parts of the product
•
use at ambient temperature varying from: see TECHNICAL DATA
•
operate indoors
•
installation in mobile homes and sports boats
•
assembly without specialists, see USER QUALIFICATION!
•
installation differs from installation position (see page 12)
•
operation of devices while driving which have not been approved for this by the
manufacturer
•
operation of cooking devices or ovens while driving
USER QUALIFICATION
Activity
Qualification
START-UP, SHUT-DOWN, RESTART,
RESTORATION, DISPOSAL,
user and operator
ASSEMBLY, REPLACEMENT,
qualified personnel, customer service
Leak check
expert*
*Experts are particularly those who, on the basis of their training, knowledge and experience
gained during practical activity, guarantee that they carry out the inspection properly.
DESIGN
Inlet connector
Outlet connector on the crash sensor
Green push button on the
crash-sensor-pendulum
Test connection
Low pressure regulator 90°
Low pressure regulator (inclined) 105°
Breather of S2SR
Connection for Eis-Ex regulator heating
CONNECTIONS
Connections could become leaky, if they are contaminated or corrupted
Therefore, the connections must regularly be checked for leak-tightness.
Swap the product where appropriate.
Keep all connections free from contamination, even small amounts of dirt can cause
connections to leak.
Gaskets in the connections must not be damaged and be placed correctly in the frame.
