Caramatic DriveOne
17 / 36
INAPPROPRIATE USE
All uses exceeding the concept of intended use:
•
e.g. operation using different media, pressures
•
use of gases in the liquid phase
•
installation against the flow direction
•
operation with inappropriate hose assemblies
•
changes to the product or parts of the product
•
use at ambient temperature varying from: see TECHNICAL DATA
•
installation differs from installation position (see page
16
)
•
withdrawal from horizontal gas cylinders
•
operate indoors
•
installation in mobile homes and sports boats
•
For assembly without operators or users, see USER QUALIFICATION!
•
operation of devices while driving which have not been approved for this by the
manufacturer
•
operation of cooking devices or ovens while driving
•
operation with high pressure hose assemblies without excess flow device
USER QUALIFICATION
Activity
Qualification
ASSEMBLY, REPLACEMENT
user and operator
OPERATION, START-UP, MAINTENANCE, SHUT-
DOWN , RESTART, RESTORATION, DISPOSAL,
qualified personnel, customer service
Leak check
expert*
*Experts are particularly those who, on the basis of their training, knowledge and experience
gained during practical activity, guarantee that they carry out the inspection properly.
CONNECTIONS
Inlet,
optional
Trading name and dimensions
acc. to standard
Installation notes
Male thread connections
•
G.13
= thread M 20 x 1.5
Tightening torque:
Coupling nut =
4 to 5 Nm
Outlet,
optional
Trading name and dimensions
acc. to standard
Installation notes
Compression fitting RVS
•
H.9
= compr. fit 8 or compr. fit 10
Connection
Trading name and dimension
Assembly
information
Test connection
Test hose G 1/4 lh nut x adapter for
test device x 750 mm
M11x1-UEM/PV
with female thread
Gaskets in the connections must not be damaged and be placed correctly in the frame.
