4.3 Turn On / Off the Motor
After the system power is on, you still need to turn on the motor before you ride. After you finish riding,
you also have to turn off the motor, then you can turn the system power off and lock the scooter..
4.3.1 Turn On the Motor
●
Before you turn on the motor, please confirm that the system power is on. The dashboard and
some lights should be on.
●
Check the following steps:
○
The seat is properly closed.
○
The side stand and main stand is retracted.
○
The throttle is not turned, touched, and stays at the starting position.
○
The reverse throttle is not activated.
○
The Smartscooter® is fully stopped.
●
Hit and hold either one of the brake lever, and use the other hand to press and hold the
”Start Button” until the dashboard shows “0” (Zero).
●
Release the
”Start Button” and brake lever, turn the throttle and go.
If you failed to turn on the motor, and the
”Error” on dashboard lights up, it may indicate that
you have not fully followed the above procedures. Please confirm the steps one by one:
●
Is the brake lever and the
"Start Button" properly pressed and held?
●
Is the seat closed?
●
Retract the side stand and main stand.
●
Make sure that the throttle is not turned and is at starting position.
●
The “Reverse” is not pressed or turned.
●
The Smartscooter® is at a complete standstill.
47
