18
Stabilize Mode
(STB)
Stabilize mode (STB) is the most acrobatic flight setting. In stabilize, the
autopilot provides basic stabilization while allowing full manual control of both
sticks. In this mode, you’ll need to make continuous, small adjustments to the
left and right sticks to maintain a hovering altitude, navigate, and maintain
orientation without autopilot assistance.
Select stabilize mode by setting left switch to center and right switch up like in
the illustration below.
Stabilize (
STB
)
center-up
»
Manual flight
»
Acrobatic flying
»
Recovery
Flying confidently in stabilize mode is required for flying your first mission.
To practice, try the exercises on page 17.
Loiter (LTR)
down-up
»
Automatic positioning
»
Easy flying
Loiter Mode
(LTR)
Loiter mode (LTR) uses GPS positioning to hold Easy Drones’ current position
and altitude automatically. Just release the sticks and it will hover in place. Use
the left stick to adjust altitude and orientation; use the right stick to navigate
and change position.
To select loiter mode, set the left switch to down position and the right
switch to the up position (down-up).
Loiter mode requires GPS lock (flashing green LED) and an HDOP value lower
than 2.0 prior to takeoff.
