®
PRO-VideoWall
10
Method B: Software Operation
System Requirements and Precautions
1.
Whenever powering off PRO-VideoWall, please stay unpowered for at least
5 to 10 seconds to allow power capacitors to discharge.
2. The PRO-VideoWall provides software control program which runs under Mi-
crosoft Windows 7, 8.1, 10 through the interface of USB virtual com control.
3. Before you click on the icon of the software, make sure you have secured the
connection between your computer USB port and the PRO-VideoWall.
After the software control setting is accomplished, it will enter directly to the
control interface.
Start the software control program
After starting the control software, the
following dialog will pop up. It has two
ways to control the PRO-VideoWall de-
vice (under Microsoft Windows 7, please
run as administrator).
1. USB Connection: Use USB to connect
the port on device and computer. Se-
lect correct virtual COM port and click
the OK button.
2. Ethernet Connection: Enter the device
IP address and click the OK button.
1
6
7
8
9
2
3
4
5
