background image

2

Thank you for purchasing from gofanco. Our products

aim to meet all your connectivity needs wherever you

go.  For optimum performance and safety, please read

the instructions carefully and keep this User’s Guide for

future reference.  If you need more information about our

products, please visit www.gofanco.com.  For technical

support, please email us at [email protected].

For drivers/manuals download, please go to

www.gofanco.com/download.

Important Safety Notices

Please read safety instructions carefully before installation

and operation.

Please pay close attention to all warnings and hints

for this device

Do not expose this unit to rain, heavy moisture, or

liquid

Do not repair the device or open the enclosure

without professional guidance to avoid electric

shocks. Doing so may void your warranty

Keep the product in a well-ventilated location to

avoid damage from overheating

Shut off power and make sure environment is safe

before installation

Do not plug the HDMI cables and IR cables in/out

when the device is in use to avoid cable damage.

Make sure they are plugged into the correct ports

Use the included DC12V power adapter only.  Make

sure the specification matches if using 3rd-party DC

power adapter

Summary of Contents for Matrix44













Reviews: