8
FAQ & Solutions
Q: What if my display shows "Waiting for connection..."
on the bottom right corner?
A:
Please check if the power adapters of Transmitter
(TX) and Receiver (RX) are connected and power
LED is ON.
Q: The display says, "Please check the TX input signal"
A:
1) Please check if there is HDMI signal input from
the Transmitter (TX) unit.
2) Use different HDMI cables.
3) If it's still not working, connect the HDMI source
device to the TV directly to see if there's a signal.
Q: The display is not clear or stable.
A: 1) Please adjust the position of Transmitter and
Receiver units and make sure they are within the
required signal range.
2) Check the HDMI cable lengths are within 2m.
3) Check the transmission distance is within 200m
(line-of-sight).
4) Press the "Reset" button on the Transmitter and
Receiver units and reconnect.
5) Remove other wireless signals and move any
obstacles that are blocking the signal line-of-sight.
6) Decrease the distance between the transmitter
unit and the receiver unit.
