6
Hardware Installation
1.
Power off all devices including your HDMI source
and HDMI display.
2.
Install the included antennas to the TX and RX.
3.
Connect your HDMI source device to the
Transmitter's HDMI Input connector with an HDMI
cable (HDMI cable not included).
4.
Optional: Connect the IR Blaster Extension Cable
to the Transmitter's IR interface port. Face the eye
towards your HDMI source device's IR window.
This connection is needed only if you need to
control your HDMI source from the remote
location.
5.
Connect your HDMI display to the Receiver's
HDMI Output connector with an HDMI cable
(HDMI cable not included).
6.
Optional: Connect the IR Receiver Extension Cable
to the Receiver's IR interface port. This connection
is needed only if you need to control your HDMI
source from the remote location.
7.
Plug the included power adapters into the
Transmitter's and Receiver's Power Jacks, then
plug both power adapters into reliable power
outlets.
8.
Power on your HDMI source device and HDMI
display.The wireless extender is ready for use.
Note
: For optimal signal range, install in a clear
environment with few obstacles. Wireless signals
from other devices, such as microwaves, wireless
mice and keyboard, etc. may interfere with
transmission. Contact our technical support team
if you have specific questions
