Goelst G-Motion, Manual

Page: 42 / 44

38
B6
English
LED signals
Normally LED signals stop after 15 s.
1. LED colors
:
green, red, yellow, blue purple orange or light blue - continous or blinking:
•
normal programming mode colors.
2. LED flashes yellow - and keeps flashing for more than 15 s.
•
the 24hrs timer is recording
3. LED flashes yellow once every 20 s.
•
the 24hrs timer is active
4. LED flashes yellow twice every 20 s.
•
the 24hrs timer is paused
5. LED displays rainbow colors continuously.
•
the showroom timer is active
System failure
1. No response to IR remote control.
•
check batteries of IR remote control
•
make sure channel A1 is selected on the IR transmitter or that other IR channels have been set.
•
check if RJ45 plug is correctly placed in the underside of the motornuit.
•
check if the receiver can receive IR signals emitted from the IR transmitter
2. Curtain stops at unexpected positions along the track
•
recalibrate Touch and Stop feature or turn this feature off.
3. Curtain moves in opposite direction, compared to controls.
•
go through § 3.2 : inverted input from controls
Power cut: Smart start-up.
A power cut generally causes no problem for G-Motion. The system will detect the event of
a power cut. After power has returned AND the curtain was displaced manually, the system
will recalibrate itself, using electronically stored end positions values and using the internal
end stops as a reference.
In case of a power cut during the self-calibrating cycle: no settings will be stored. Ensure
power has been restored, then restart the cycle by shortly pressing
OPEN
or
CLOSE
.
What if ...