STROKE
ADJUSTER
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
E. HOW TO CHANGE THREADED MANDREL AND NOSEPIECE
FIXING-HOLE PIN
PIN RETAINER
NOSEPIECE
NOSEPIECE
LOCK NUT
HEAD
NOSEPIECE
Use Hand to assemble
NOSEPIECE LOCK NUT
onto the working size of
NOSEPIECE.
Use Hand to screw
NOSEPIECE into HEAD by
turning Clockwise.
Finally, take off PIN RETAINER
and pull FIXING-HOLE PIN
from the FIXING-HOLES.
7
6
8
THREADED MANDREL
Turn CLOCKWISE To
Dismount THREADED
MANDREL
Use Hand to unscrew
NOSEPIECE and
NOSEPIECE LOCK NUT
from HEAD , then
dismount NOSEPIECE
LOCK NUT from
NOSEPIECE .
1
2
1
2
Use Hand to rotate THREADED
MANDREL to align 2
FIXING-HOLES of HEAD with
inside LONG FIXING-HOLE of
MANDREL SEAT , then insert
FIXING-HOLE PIN through the
FIXING-HOLES and put PIN
RETAINER onto FIXING-HOLE
PIN End . The free rotation of
MANDREL SEAT is locked.
Use SERVICE WRENCH and Hand
to loose and dismount THREADED
MANDREL from MANDREL SEAT
by turning Clockwise.
( NOTE: MANDREL SEAT has
Left-Handed Female Threads. )
Now the TOOL is ready for changing
another size of THERADED
MANDREL and NOSEPIECE.
SERVICE WRENCH
Turn COUNTER-
CLOCKWISE To
Assemble
THREADED MANDREL
THREADED
MANDREL
Use Hand and SERVICE WRENCH
to assemble the working size of
THREADED MANDREL into
MANDREL SEAT firmly by turning
Counter-Clockwise.
( NOTE: MANDREL SEAT has
Left-Handed Female Threads. )
5
Close 2 HANDLES completely by
turning down STROKE
ADJUSTER until it touches the
REAR BODY . Use SERVICE
WRENCH to loose NOSEPIECE
LOCK NUT by turning
Counter-Clockwise .
1
2
Turn COUNTER-CLOCKWISE
To Loose NOSEPIECE LOCK NUT
REAR BODY
SERVICE WRENCH
NOSEPIECE
HEAD
NOSEPIECE
LOCK NUT
1
1
2
1
2
1
2
Rotate
THREADED MANDREL
FIXING-HOLE PIN
PIN RETAINER
FIXING-HOLES
2
1
3
4
PRECAUTION :
Check the Thread Size of Fastening BOLT and WORKPIECE Thickness to determine the Thread Size, Grip Range,
Material and Type of RIVET NUT, then drill or punch the correct size of Hole in the WORKPIECE to fasten RIVET NUT.
The Working Size of THREADED MANDREL and NOSEPIECE should be same as the Thread Size of RIVET NUT.
NOSEPIECE
NOSEPIECE
LOCK NUT
HEAD
FIXING-HOLES
5
SERVICE WRENCH
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
