Close 2 HANDLES completely to touch REAR
BODY, and adjust the STROKE ADJUSTER downward
to let Bottom Edge of STROKE ADJUSTER parallel
with the “
Actual Figure on STROKE INDICATOR”
.
Now the correct Stroke Distance has been re-adjusted.
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
K-2) IF STROKE IS ADJUSTED TOO LONG AND HAND FORCE CAN NOT SQUEEZE
2 HANDLES TO TOUCH REAR BODY, HOW TO RE-ADJUST THE CORRECT
STROKE DISTANCE TO PROTECT THIS TOOL AND RIVET NUT THREAD
FROM DAMAGE:
11
As the Stroke Distance has been re-adjusted, the
Protruding Length (L) of THREADED MANDREL
needs to be adjusted again to be same as RIVET NUT
Height (H), L = H, as per the above "G" instruction.
2
3
4
1
1
2
Open 2 HANDLES fully , turn ROTATING KNOB
Counter-Clockwise to unscrew THREADED
MANDREL from the Gripped RIVET NUT and
WORKPIECE .
1
3
2
DO NOT CONTINUE TO SQUEEZE 2 HANDLES, still
hold 2 HANDLES and find out the
“Actual Figure on
STROKE INDICATOR”
and remember that.
ACTUAL FIGURE ON
STROKE INDICATOR
STROKE INDICATOR
HANDLE
HANDLE
REAR BODY
THREADED MANDREL
GRIPPED RIVET NUT
+ WORKPIECE
GRIPPED RIVET NUT
+ WORKPIECE
1
3
1
ACTUAL FIGURE ON
STROKE INDICATOR
= CORRECT STROKE DISTANCE
STROKE INDICATOR
Adjust Downward
STROKE ADJUSTER
1
1
2
2
K. TROUBLESHOOTING
REAR BODY
DO NOT CONTINUE TO SQUEEZE 2 HANDLES!
L = H
PROTRUDING LENGTH (L)
OF THREADED
MANDREL
RIVET NUT HEIGHT (H)
L
H
Rotate
NOSEPIECE
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
STROKE
OVER-STROKE !
MM INCH
10
5
0
0.4
0.2
DO NOT SET
0
Turn
ROTATING KNOB
Counter-Clockwise
2
