Godrej ET - 16AHD2 User Manual Download Page 65

Page: 65 / 69

5.2 Maintenance

(1) Please brush printed circuit boards, connectors, fans, machine box and so on

regularly.

(2) Please keep the grounding well done to prevent the video or audio signal interfered

and the AHD DVR from static or inductive electricity.

(3) Do not pull out the video signal line or RS-232 port or RS-485 port with the

power on.

(4) Do not use the TV in the local video output port (VOUT) of AHD DVR. It will

damage the video output circuit easily.

(5) Do not turn off the switch directly. Please use the turn-off function in the menu or

press the turn-off button in the panel (3 seconds or longer) to protect the hard
disk.

(6) Please keep the AHD DVR away from heat resource.
(7)Please keep the AHD DVR ventilated for better heat radiator. Please check the

system and maintain regularly.

Summary of Contents for ET - 16AHD2






































































Search results

Summary of Contents for ET - 16AHD2

Reviews:

Related manuals for ET - 16AHD2

Brands by name

Popular brands

Godrej ET - 16AHD2, User Manual

Search results

Summary of Contents for ET - 16AHD2

Reviews:

Related manuals for ET - 16AHD2

Brands by name

Popular brands