15
corresponding preset point. Preset button Preset point input blank.
Figure 3.11 PTZ Control
2. Cruise between Points
Multiple preset points connected cruise lines, call cruise between points, the
PTZ run around on the line.
1) Cruise Between Points Settings
Cruise lines are connected by multiple preset points, setting procedure is as follows:
Step1: In Figure 3.9, the Direction key will turn PTZ to designated location,
click Settings button to enter Figure 3.12.
Step 2: Click Cruise buttons, the write proper value into the Cruise
Line and Preset Points blank
，
then click Add Preset Points
button, complete setting (also can add and delete cruise line which
has been set up).
Step 3: Repeat step1 and step2, until set out all the preset designated cruise
lines.
Remove Preset: Please input preset value in the blank, click Remove Preset button, then
remove the preset points.
Remove Cruise Line: Input the number of cruise line, click Remove Cruise
Lines button, then remove the cruise lines set.
Summary of Contents for ET - 16AHD2
Page 69: ...66...
