Mechanical Variant Control Panel
CONTROL PANEL
POWER
Connect to the power supply and turn the ‘POWER’ knob to ‘ON’.
COOL
Turn the ‘POWER’ knob to ‘ON’. Turn the FUNCTION knob to ‘COOL’ to start the
pump. It takes a few minutes to obtain the full effect from this mode.
SWING
Turn the ‘POWER’ knob to ‘ON’. Turn the FUNCTION knob to ‘SWING’. The louvers
will begin to move from right to left automatically.
COOL + SWING
Turn the ‘POWER’ knob to ‘ON’. Turn the FUNCTION knob to ‘COOL + SWING’ to
use both the functions simultaneously.
SPEED
Turn the POWER knob to on and turn the SPEED knob. The fan will start. Change the
speed from ‘TURBO’ for turbo speed (Turbo Mode in select models only, Check
Technical Specification on Page 14) to ‘HI’ for high speed, to ‘MED’ for medium
speed and to ‘LOW’ for low speed. To switch the fan OFF, turn the SPEED knob to
'OFF' position.
(9)
^maV H$m nhbm Egr dmbm BÝìhQ>©a E`a Hw$ba Q>oŠ Zmobm°Or
