•
Please read these instructions carefully before usage and keep them for future
reference.
• Remove the bottom tray and place Air Cooler on a solid horizontal surface.
• Remove packing material from the Air Cooler.
• Unwind the cable & Plug pin from the Air Cooler's back winding tray.
• Check if all switches are in off position and then insert the plug pin into the wall socket.
• Use standard power supply.
•
Keep windows open for cross ventilation to optimize cooling.
•
Do not obstruct the air outlet. Keep a minimum space of 6 inches around the
unit.
• Keep louver direction at body level for optimized cooling impact.
• Ice cubes can be used in two different ways for extra cooling as per need:
- Open water inlet provided on back panel side & put ice cubes in ice bag for extra cooling
as required.
- Open the ice chamber lid on top side & put ice cubes in the chamber.
• Always ensure that there is water in the unit when in use.
• After filling with water, Air Cooler should not be tilted.
• Do not place unit under direct sunlight or near a heat source.
• Power On/Off to start or stop Air Cooler.
•
• Select Water Pump On or Off function as desired.
• *Select Ionizer/Eco Mode function according to your comfort.
• For required airflow direction, adjust vertical louver through swing On /Off function.
• Horizontal louvers can be adjusted manually.
• Do not allow the motor or any other electrical & electronic controls / components to be
exposed to water.
• In order to maintain better hygiene, it is recommended to keep the water tank empty,
clean and to cover the air cooler when not in use.
• While changing Honeycomb pads or any other parts, use original Godrej parts from
authorized service centre.
OPERATING GUIDE
(15)
^maV H$m nhbm Egr dmbm BÝìhQ>©a E`a Hw$ba Q>oŠ Zmobm°Or
