DMX512
3. Mount on the light stand
Loosen the handle of the controller
clamp, then insert the light stand and
rotate the handle to tighten. Finally,
insert the V port of the controller into
the clamp slot.
Tip:
Press and hold the mount fixing
pusher can easily remove the controller.
4.Installation and disassembly the
protection cover
Installation: Press the Mount Fixing
pusher top-down, put the protection
cover on Bowens Mount, and rotate
clockwise to tighten it.
Disassembly: Press the Mount Fixing
pusher top-down, then rotate counter-
clockwise to remove it.
Note: Make sure to remove the protec-
tion cover before use to avoid overheat-
ing damage. Put on the protection cover
to protect the lamp when not in use.
5. Installation and disassembly the
standard reflector
Installation: Press the Mount Fixing
pusher top-down, put the reflector on
Bowens Mount, and rotate clockwise to
tighten it.
Disassembly: Press the Mount Fixing
pusher top-down, then rotate counter-
clockwise to remove it.
Connect to DMX Controller
The connecting operation diagram of Controller and DMX Controller is as follows:
Multi-connected
2. V-mount battery power supply
Power Supply
1.AC Power Supply
AC100V-240V
Note: Please press the latch button when installing or disassembling the
power cable and connecting cable.
spring latch
Note:
The light can be supplied by 14.8V or 26V V-mount battery. Only the side with
yellow battery removal button supports unilateral power supply. When it is powered by
two batteries and one of which is low, the device still can't work normally even if the
other one is full. The corresponding battery icon will blink in low battery mode. It is
recommended to check whether both batteries have sufficient power when using two
batteries.
Display Screen
Lock Function Indication
Brightness Value
Bluetooth
2.4G Wireless
Group
Channel
Dimming Curve
Battery Level
Indication
Battery Level
Indication
Overheating
Alert
4900
K
CCT value
25
26
