Godox UL150IIBi Instruction Manual Download Page 11

Safety Instructions and Attentions

First of all, as the most basic principle: This product is a professional lighting set equip-
ment and should be used by professional lighting engineers or under the guidance of 
professionals. Basic safety attentions must always be followed during use, as follows:

Before use, please read and understand these instructions and attentions.
Professional lighting is prohibited for children. When children are near, parents or 
accompanying persons must supervise closely to prevent children from personal 
injury due to collision with lamps or private use of lamps.
This lighting product is not ordinary lighting product and cannot be used for general 
lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid 
using this product.
When the lamp is on, it must be used with care. Do not touch high-temperature 
parts, such as LED lamp beads, to avoid burns. 
When the lamp is on, it is forbidden to look directly at the lamp beads under any 
circumstances. Strong light should be used under the guidance of professional 
lighting engineers. Avoid prolonged exposure to strong light under any circumstanc-
es. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor 
immediately.
If the lamp bead is damaged or deformed by heat, stop using this equipment, and 

contact the manufacturer, service agent or qualified maintenance personnel to 

replace the lamp bead in time to avoid accidents.
This product is only suitable for use in -20

 to 40

 operating environment and 

normal humidity environment.
Do not use damaged equipment or accessories, and wait for professional mainte-

nance personnel to check and repair to confirm being normal before use. 

During using, if the casing of this product is broken due to being dropped, squeezed 
or subjected to strong impact, please do not use it, so as to avoid electric shock 
injury due to contact with internal electronic components.
If an extension cord is required, please use an extension cord with a current rating 
greater than or equal to that of the equipment. If an extension cord is rated less than 
the equipment, overheating may result.
Some products have long power cords, please place the power cords properly and 
keep them in a safe place. Avoid contacting the power cord with overheating surfac-
es, avoid improper placement that could cause pulling damage, or trip on-site 

personnel. Please use the certified power cord from the original manufacturer. If the 
product is damaged by using a non-certified power cord, it will not be repaired by our 

factory.
Be sure to unplug equipment from the power outlet before cleaning and repairing. 
When not in use, do not pull the power cord to unplug the equipment. For normal 
power-off, please hold both ends of the plug of the equipment with your hands and 
pull the plug out of power outlet. This equipment needs to be connected to a ground-
ed outlet.

keep these instructions!

19

20

This equipment is not waterproof, please keep it dry and do not immerse it in water 
or other liquids. The equipment should be installed in a dry and ventilated place, and 
avoid using it in rainy, humid, dusty or overheated environments. Do not place any 
objects on the lamp or let liquid flow into the lamp to avoid accidents.
Do not disassemble the product without permission. If the product fails, it must be 
checked and repaired by authorized maintenance personnel.
Before storing, make sure that the equipment has cooled down completely. For 
storage, unplug the power cord from the equipment. The equipment should be 
placed in the carrying case or in a ventilated dry place.
Do not place equipment near flammable and volatile solvents such as alcohol and 
gasoline.

Do not use accessories that are not recommended by our factory to avoid fire, 

electric shock or personal injury. 
When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft 
cloth to wipe the dirt of the equipment.
Please take off the protective cover before using.
This product complies with ROHS

CE

and FCC certification, please refer to the 

relevant national standards for use and operation.
The safety instructions are formulated according to the strict testing of the factory, 

and the design and specifications of the equipment are subject to change without 

prior notice. For latest product information, please check the GODOX website and 
view latest electronic instruction.

Some products have built-in lithium batteries. Please use specified chargers, and 
use them within a proper range of the specified voltage and temperature according 

to the correct operating instructions.
Some products are battery powered. Do not use any batteries, power sources or 

accessories not specified in the instructions for such products. Keep batteries and 

other accessories out of the reach of children and infants. In the instance that a child 
or infant swallows a battery or accessory, immediate emergency medical attention is 
required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits 
an abnormal odor, remove it immediately. Be careful during removal to avoid burns. 

Continued use could result in fire, electric shock, or burns. Do not use any deformed 
or modified batteries. Do not disassemble or modify this product or battery. Do not 
heat or solder the battery. Keep the battery away from fire or water. Do not incorrect

-

ly insert the positive and negative ends of batteries, or mix old and new batteries or 
batteries of different types together.
One-year warranty period, accessories such as consumable batteries, adapters, 
power cords, etc. are not covered by this warranty.
If it is found that the equipment is repaired without authorization, the one-year 
warranty period will be cancelled and relevant fees will be charged for maintenance.
Machine failures caused by non-standard operation are not covered by the warranty.

1.
2. 

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.
20.

21.

22.

23.

24.

25.

26.

Summary of Contents for UL150IIBi






















Reviews: