2. Mount on the tripod
Adjust the light body to a proper angle,
rotate the screw of sleeve knob to
install the light body on the tripod, then
rotate the screw of sleeve knob to fix
the light body on the tripod. The inclina-
tion angle of the light body could be
adjusted by loosening the bracket angle
adjustment handle and then screwing
down the handle afterwards.
Note:
The tripod belongs to separately
sold accessories.
Installation and Disassembly Guide
1. Connect the controller and the light body
Press and hold the spring latch button of the connecting cable, insert the connecting
cable into the DC INTPUT Port of the light body, then insert the other end of the
connecting cable into the DC OUTPUT Port of the controller to complete the connec-
tion.
Separately Sold Accessories
Remote Control RC-A6
Safety Wire Rope
What’s in the Box
1.USB Type-A Port
2.SET Adjustment Dial
3.Power Switch Button
4.MENU Button
5. /FX Button
6.DMX Setting Button
7.Black Battery Removal
Button
8.V-mount Battery Box
9.AC INPUT Port
10.DC 48V Port
11.Yellow Battery Removal Button
12.DMX IN XLR Port
13.DMX OUT XLR Port
Light Body*1
5m Power Cable*1
Connecting Cable*1
Controller Clamp*1 Lamp Cover*1
Connecting Cable
Fixed Rope
*1
Controller
*1
Bowens-mount
Reflector RFT-19
*1
Instruction
Manual
*1
Fresnel Attachment
for COB LED lights
SpotLight Attachment
23
24
①
②
③
④
⑤
⑥
