Separately sold accessories
The product can be used in combination with the following accessories sold
separately, so as to achieve best photography effects: X1,
X2, XPro, XT16 or FT-16
remote control, Power Inverter, Softbox, Photographic Umbrella, Light Stand,
Barndoor, Snoot, etc.
5. Beep
9. Modeling Lamp is off
3. Built-in Wireless Channel Dial
12. Modeling Lamp is off when
triggering the flash
4. Slave Model Indicator
6. Temperature Alarm Display
2. Built-in Wireless Channel
8. Flash Output
1. Built-in 2.4G Wireless
Transmission
7. Built-in Wireless Group
10. Modeling Lamp is in the PROP
mode
11. Modeling Lamp shows the power
in percentage
LCD Panel
1.
Power Cord
2.
Lamp Cover
3. Modeling Lamp
4.
Instruction Manual
Accessories
CH
S
%
OFF
PROP
1
7
9
8
6
4
11
12
2
3
5
10
1. Take down the lamp cover.
Install the modeling lamp and
put on the glass protection
cover and the standard
reflector.
2. Attach the flash unit onto an appropriate light stand. Adjust the mounting
bracket for a good angle and make sure it is tightened and fixed. Use the
direction adjusting handle to adjust the flash to a desired direction. Umbrella input
is for different photo umbrellas to put in.
(To uninstall the standard
reflector, press the release
button on the flash head and
turn the standard reflector
counter-clockwise to take it
out, as illustrated in the
picture.)
OPERATIONS
Flash Preparation
Power Connection
Use the power cord to connect the flash to an AC power source and turn on the
power switch .
Short press the Modeling Lamp Button ( ) to choose the modeling lamp’s mode
(OFF, PROP and percentage); and long press the Modeling Lamp Button ( ) to
switch on or off the function that the modeling is off when triggering the flash.
Modeling lamp will be off automatically after lighting for 4 hours, avoiding
overheat due to long-time lighting when the user is not nearby.
OFF:
Modeling lamp is off.
PROP:
The modeling lamp's power changes with the flash's power. The bigger
power the flash has, the brighter the modeling lamp is.
Percentage:
Adjust the modeling lamp's light brightness manually from 5% to
100%.
Setting:
2.
When PROP is displayed, short press the < > Button to enter Percentage
mode. Short press the SET Button and the percentage value is blinking. Turn
the Select Dial to choose the light brightness from 5% to 100%. Short press the
SET Button to exit.
1.
When OFF is displayed, short press the < > Button to enter PROP mode.
Now the LCD panel shows PROP.
Modeling Lamp
- 14 -
- 13 -
