MAINTENANCE MANUAL
GP/146/99. Issue 9. October 2005
The oil level can be checked by removing one of the oil level check point plugs,
located on both sides of the gearbox, see the photograph above. The oil should
be just up to the lower rim of the hole, which indicates the capacity is 1.5 litres.
Replace the plug and hand tighten with a suitable spanner.
The gearbox oil should be changed completely every 250 running hours or
annually, whichever is sooner.
The gearbox cooling system requires no regular maintenance. If the pump needs
to be drained for any reason, there is a drain located at the lowest point in the
cooling system. To drain the system, either remove the plug, or, if connected to a
remote drain, open the remote drain cock. Allow all water to completely drain
away before replacing the plug or closing the remote drain cock.
Cooling system drain point
Note: Certain maintenance access points will vary according to installation
configuration.
©Hale Products Europe LTD, Warwick
GP/146/99
WTmaint - Issue9. 10-2005October 2005
33
