26
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the
right to amend specifications without notice or obligation.
Remove the plugs from the gearbox filling point and oil level check point.
Figure 23 (and part of Figure 24) shows the gearbox in the down position. In this
position there are two possible oil filling points on top of the gearbox and two oil level
check points, one either side of the gearbox towards the bottom. Use the points that are
the most accessible.
Fill the gearbox until the oil flows from the oil level check point. This is the only accurate
method of checking that the correct amount of oil has been added to the gearbox, as it
allows for different sizes of gear ratios. The approximate capacity is 1.2 litres.
Figure 24.
Check that any electrical components are functioning correctly, e.g. the instrument
panel gauges, tachometer.
Water Ring Primer (if option installed)
– ensure that the primer header tank is full of
water, approximately 4.5 litres.
For a gearbox in the left or right
position
– two fill points are available
on the top and one oil level check
point on the side of the gearbox, see
figure 24 to the left.
Oil fill
Oil level check
Oil drain
Oil fill
Oil level
check
Oil drain
Oil fill
DOWN OPTION
Oil level check
Oil drain
Oil level
check
