20
3
Printer Setting And Control
3.1 Operation Panel
020
FEED Button
When you press the FEED button, the printer moves the label to the defined stop position.
If you are using continuous labels, pressing the FEED button will move label stock until you release the button again.
If you are using individual labels, pressing the FEED button will move only one label.
If the label does not stop at the correct position, you need to run the auto-detection function on the label stock, please see Section 3.2 Label
Calibration and Self Test.
LED Indicators
OPERATION PANEL
FEED BUTTON
POWER BUTTON
STATUS LED
POWER LED
Operation Panel Introduction
POWER Button
Press the POWER button and the LED indicator lights up green. The printer is on “ Ready to print “ status now.
When printer is turned on, keep pressing the POWER button for 3 seconds will turn the printer off.
LED Indicator
Status
Description
Green
Standby
The printer is ready for operation.
Red
Error
The printer has detected an error.
See Section 3-3. Error Alerts.
